threaded holes in lower stretchers

Questions and comments concerning the assembly of the Jointmaker Pro

Moderator: Michael

threaded holes in lower stretchers

Postby Don » Tue Apr 21, 2009 11:10 am

The lower stretchers have a hole near each end. They seem to be threaded. I do not have anything which matches the threads. What size are the threads??
Don
 
Posts: 2
Joined: Tue Aug 19, 2008 11:52 am

Postby John » Tue Apr 21, 2009 11:35 am

Don;

Those holes are not threaded--or at least they should not be. They are through holes for fastening the JMP to a stand--they line up with ours or can be used for fastening the JMP to a shop built stand.

--John
John
Site Admin
 
Posts: 187
Joined: Thu Apr 10, 2008 11:54 am

Re: threaded holes in lower stretchers

Postby maryxeniia@gmail.com » Thu Nov 08, 2018 1:02 am

thank John, your information was very helpful, i did not understand the effect of the hole until i read your post!
news today
maryxeniia@gmail.com
 
Posts: 1
Joined: Thu Nov 08, 2018 12:53 am


Return to Jointmaker Pro Set-Up & Assembly FAQ

Who is online

Users browsing this forum: No registered users and 2 guests

cron