Overall dimensions Jointmaker Pro v2

Discuss general thoughts on the Jointmaker Pro.

Moderator: Michael

Overall dimensions Jointmaker Pro v2

Postby mschmid » Sun Jul 24, 2011 5:48 pm

Hi,

The specifications of the Jointmaker seem to be clear:
The dimensions of the JMPv2 is 28" x 16" x 12" tall


But... are these the overall dimensions including crank and everything?
Or in other words, would the completely assembled Jointmaker fit in a box of 28" x 16" x 12" ?
mschmid
 
Posts: 5
Joined: Sat Apr 02, 2011 4:08 pm

Re: Overall dimensions Jointmaker Pro v2

Postby Rutager » Sat Jul 30, 2011 8:36 am

Hello,

I just took some measurements and found that the main body is 26" the front crank sticks out 4.5" and the back knob about 1"- so 31.5" would be close. Width is a tad over 16". Height is 12" with the metal fence installed, but they're easily removed bringing the height to 10". With the wooden fence installed; 13.5"

-Rutager
Rutager
 
Posts: 11
Joined: Fri Apr 01, 2011 4:53 pm

Re: Overall dimensions Jointmaker Pro v2

Postby mschmid » Mon Aug 01, 2011 4:37 pm

Hello Rutager,

Thank you very much for the detailed measurements! This will serve me a lot for getting done the adequate storage cabinet before my magic machine will arrive. :-)

Best regards,
Markus
mschmid
 
Posts: 5
Joined: Sat Apr 02, 2011 4:08 pm


Return to Jointmaker Pro General Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron