Ripping with the Jointmaker Pro

Discuss general thoughts on the Jointmaker Pro.

Moderator: Michael

Ripping with the Jointmaker Pro

Postby Blair » Fri Aug 21, 2009 3:58 pm

I'm bound and determined to figure this one out. I built a holding fixture that works and I'm using the rip blades with good success. Here is a little You Tube explanation of what I came up with.

Anyone else try ripping? If so, how are you doing it?

Blair Glenn

http://www.youtube.com/watch?v=lUARY85r6_E
Blair
 
Posts: 7
Joined: Tue Jan 06, 2009 10:39 am

Postby rwest » Sat Aug 22, 2009 1:51 pm

Blair,

Great video! Thanks for letting us see your idea.

Rutager
rwest
 
Posts: 265
Joined: Mon Apr 28, 2008 4:59 pm

Re: Ripping with the Jointmaker Pro

Postby makesmilehowto2@gmail.com » Thu Nov 08, 2018 12:52 am

Your video is very helpful, thank you for sharing!
tik tok video
makesmilehowto2@gmail.com
 
Posts: 2
Joined: Fri Oct 05, 2018 7:19 pm

Re: Ripping with the Jointmaker Pro

Postby miajacob098@gmail.com » Tue Nov 13, 2018 12:15 am

Great info
miajacob098@gmail.com
 
Posts: 4
Joined: Tue Nov 13, 2018 12:13 am


Return to Jointmaker Pro General Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron