What tool choose and why?

Post pictures of your original, unique designs that you made. Come on! Show it off here!

Moderator: Michael

What tool choose and why?

Postby Gerardo » Thu Jan 27, 2011 7:42 pm

I would like to know if I can do the same things, no matter if I must work harder, with the Jointmaker Pro V2 and the Jointmaker SW

I'm sorry I place the post in a wrong place :oops:
Gerardo
 
Posts: 4
Joined: Thu Jan 27, 2011 7:34 pm

Postby rwest » Fri Jan 28, 2011 7:11 pm

Hello Gerardo,

Yes, the V2 blade tilts 45 degrees both directions while the SW does 45 on one side and 15 on the other, so you might find that you have to flip your stock to make the cut you desire. The depth of cut and max. length are the same on both saws. You can do the same cuts on both saw, but as you asked, you might have to "think harder" when you set up for your cut! I hope this is helpful.

-Rutager
rwest
 
Posts: 265
Joined: Mon Apr 28, 2008 4:59 pm

Postby Gerardo » Mon Jan 31, 2011 10:27 am

Thanks a lot!
Gerardo
 
Posts: 4
Joined: Thu Jan 27, 2011 7:34 pm


Return to Original Designs

Who is online

Users browsing this forum: No registered users and 2 guests

cron