DJ-1 Index Jig

Moderator: Michael

DJ-1 Index Jig

Postby Rutager » Sun Jul 03, 2011 6:01 am

Hello,

This jig has been "floating" around my brain for a while, but I decided to wait for the Universal Jaw set, because I wanted to make sure it was compatible. The idea behind this jig is to be able to set repetable stops for doing multiples. I built it using "t" track with a ruler, flip stops, 1/2" baltic birch ply, 3/4" baltic birch ply and common hardware. I would also like to come up with a movable stop that would index off of the previous hole to set the next hole. Please let me know if you have any ideas for making one or if you are aware of a commercially available one.

Image

Flip stops set:
Image

Drilling with the CT-16
Image

Back side of jig; these bars allow the jig to adjust to different widths, I attached them using machine screws with washers and nylock nuts so they could swivel without falling apart. Thickness of the workpiece is adjusted at the Universal Jaws:
Image

End view showing the 45 degree angle of the jig to register it in the DJ-1:
Image

If you have any questions or suggestions, please let me know.

Thanks, Rutager
Rutager
 
Posts: 11
Joined: Fri Apr 01, 2011 4:53 pm

Return to General DJ-1 Questions and Observations

Who is online

Users browsing this forum: No registered users and 2 guests

cron