Product Description
The Face Bead kits for the HP6-v2 Mini Multi plane may be the most versatile in the family.
These kits allow you to cut a single 1/2 bead on an edge or face of a board. If used on a corner, a 3/4 bead is possible by working both surfaces. In addition, either will do a full bull nose on the corresponding size stock.
The results are razor crisp. It can be moldings, box making, frames, drawer details and a host of other projects when a sudden urge to deviate from 90 degree corners comes upon you…
Please note: These profiles fit the HP-6v2 Plane Body only.
These kits allow you to cut a single 1/2 bead on an edge or face of a board. If used on a corner, a 3/4 bead is possible by working both surfaces. In addition, either will do a full bull nose on the corresponding size stock.
The results are razor crisp. It can be moldings, box making, frames, drawer details and a host of other projects when a sudden urge to deviate from 90 degree corners comes upon you…
Please note: These profiles fit the HP-6v2 Plane Body only.
Will these soles fit the original brass HP-6 Body? No, there are not screw holes to attach to the HP-6 Body.
Loading...