The DJ-2 Drilling Jig features a floating bushing housing which allows you to set your drill centerline anywhere along the beam using the built in Imperial or metric rules. It is fast, versatile and can easily be centered simply by setting both sides of the bushing housing to the same distance on each beam.
There is not a more accurate of a way to drill holes with a bit than through a bushing—the accuracy of this jig is unparalleled. The DJ-2 will do everything the DJ-1 will do and more…
It is now possible to add an additional DJ-2 Bushing Housing—this will allow for multiple holes on a centerline perpendicular to the reference jaws of the DJ-2. It is the most versatile drilling system and really shines in shops with limited space. We fondly refer to the DJ-1 and DJ-2 as drill presses in a “drawer”.
The DJ-1 community is an enthusiastic and inventive group. If you would like to see how your fellow woodworkers are putting this remarkable tool to work, check out the DJ-1 forum here.
The DJ-2 also allows for the addition of a Flip Stop Kit. This is very handy when drilling identically located holes in multiple components. If you are a current DJ-1 owner and would like to employ the stop system, all you need are a new set of DJ-2 “V” Jaws.
The DJ-1 and DJ-2 share many similar components and if you don’t mind sharing components, you can create either a DJ-1 or a DJ-2 by ordering the DJ-2 Base Kit and new “V” jaws. All accessories for the DJ-1 will seamlessly fit the DJ-2 Drilling Jig including the “DJ Universal Jaws”.
The uses for the DJ-2 are almost endless!
This kit includes the DJ-2 Pro with "V" Jaws and the following Imperial bushings:
5/8" ID bushing
1/2" ID bushings (2)
7/16" ID bushing
3/8" ID bushings (2)
5/16" ID bushing
1/4" ID bushing (2)
3/16" ID bushing
1/8" ID bushing