You're currently on:

Precision Table Saw Standard Sled Kit

Zoom Out
Zoom In

Precision Table Saw Standard Sled Kit

Availability: In production, call for availability Learn more »

Quick Overview

Our Precision Table Saw Standard Sled Kit allows you to build an uber-accurate sled for any table saw that has 3/4" miter gauge slots. Check out the product details below!

$649.00

Founder's Circle Members enjoy a 10% discount on almost every item on our site with the exception of Commemorative Tools, Books and Clearance Items.
Founder's Circle Price: $584.10
Learn More »

Bookmark and Share

Product Description

The fence system consists of two independent fences, both featuring the ability to move stops without backlash in 0.001” (.05mm) increments over the 18” (450 mm) range of the fence. The stops are adjustable in both perpendicularity to the tables and in parallelism to the blade.  The stop assemblies engage a backlash free lead screw with micrometer readouts on each end of the fences.  The stops can be locked to the fence when needed but quickly pivot out of the way for rapid traverses, or, the stop finger can be flipped upward without unlocking the stop from the fence for a quick crosscut prior to cuts to a precise length.


We have taken the micro-adjustable fence concept designed for the Jointmaker Pro and are now offering it as a Precision Table Saw Sled Kit.
In this kit you receive the following;
• 1 - 18" Left Fence, w/2 zero backlash, quick traverse flip stops and 0.001" resolution micrometer adjustor
• 1 - 18" Right Fence, w/2 zero backlash, quick traverse flip stops and 0.001" resolution micrometer adjustor
• 2 – ¾"x ¼" x 22" cold rolled steel miter gage slot guides, drilled and tapped.
• 2- ½" thick , anodized aluminum bridges
• All mounting hardware.
• Assembly Instructions
The only thing you need to provide is the sled material and a couple hours of build time—we will take you through process and calibration step-by-step.


THE BASIC FENCE SYSTEM
The precision fence system consists of two independent, 18”  (450mm) fences, both featuring the ability to move stops without backlash in 0.001” (.05mm) increments over the 18” (450 mm) range of the fence. The stops are adjustable,  both in perpendicularity to the tables and in parallelism to the blade.  The two fences are “bridged” together so both sliding tables work in unison.  The quick release, zero backlash flip stops are fast, accurate and repeatable.
The stop assemblies engage a backlash free lead screw with micrometer readouts on each end of the fences.  The stops can be locked to the fence when needed but quickly pivot out of the way for rapid traverses, or, the stop finger can be flipped upward without unlocking the stop from the fence for a quick crosscut prior to cuts to a precise length.
NOTE: If you desire a metric version you will need to contact us regarding your miter gage slot width.



THE MITER/TENON ATTACHMENT
There has never been a table saw sled quite like the Precision Sled Kit and the capabilities get quite exciting with the available accessories, the most important of which is the Tenon/Miter Accessory.  By removing the fingers from both heads on one fence, the Tenon/Miter Accessory can be attached. This creates a firm foundation that will allow you to not only cut tenons (with the ability to use the micrometer adjustor), but you can also cut many miters, at any angle, without tilting the blade.
This is a completely new experience for most woodworkers and we are happy to share that not only are the setups much easier, they are much faster as the trial and error tests are reduced or eliminated.  
The Tenon/Miter Accessory includes a protractor plate, the arm and an integral, friction lock “C” clamp for holding your stock against the arm. This versatile accessory makes set-ups so easy and fast—it just makes cutting wood accurately easy as can be.



THE BIAS ARM
This unique arm fastens to the Tenon/Miter Protractor Plate and allows you to clamp square stock at a 45 degree bias to the blade which creates some very interesting detail cuts as well as some interesting joinery options.  It comes with a “V” groove clamp pad that screws on to the integral “C” clamp allowing you to clamp directly onto the corner of the stock without damaging the corner.
Imagine cutting a tenon and being able to recut the cheeks in 0.001” increments. Imagine miter set-ups without tilting the blade.  The new Precision Cross-Cut Sled Kit will make you a much more accurate woodworker literally overnight.


The Precision Sled Kit makes cutting precisely easy for woodworkers of all abilities—it is a remarkable fence that allows you to achieve remarkable results in the shortest time possible.


 


Write Your Own Review

You're reviewing: Precision Table Saw Standard Sled Kit

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars
Overall