You're currently on:

HP-10 90 Degree V-Groove Profile

Zoom Out
Zoom In

HP-10 90 Degree V-Groove Profile

Item Number: 1101-263-28

Availability: In production, call for availability Learn more »

Quick Overview

Inlay corner moldings into planar surfaces to add contrast and texture to your projects with the HP-10 90 Degree V-Groove Profile.


THis profile is also part of the HP-10 V-Groove Kit "Works".

$198.00

Founder's Circle Members enjoy a 10% discount on almost every item on our site with the exception of Commemorative Tools, Books and Clearance Items.
Founder's Circle Price: $178.20
Learn More »

Bookmark and Share

Product Description

The coolest use for the HP-10 90 Degree V-Groove Profile is to inlay corner moldings into planar surfaces to add contrast and/or texture. It’s fast, fun, and as always, when done well, adds much interest. 


Using the “V” Groove Profile requires the use of a fence or guiding board clamped to your stock if the distances exceeds the fence capacity for dead straight cuts. We recommend using the HP-10 Guide Fence when your cuts are less than 3" from the edge of your stock. If you have a need for a "V" groove that exceeds the capacity of the fence system you will need to clamp a guide in place. The side of the HP-10 body will ride against this reference and your cuts will be as straight as your reference edge.


To sharpen any of the irons, all you need to do is hone the bevel surface at 30 degrees, no special hones required.


Using the HP-10 “V” Groove Profile requires the use of a fence or guiding board clamped to your stock. We recommend using the HP-10 Guide Fence when your cuts are less than 3" from the edge of your stock. If you have a need for a "V" groove that exceeds the capacity of the fence system you will need to clamp a guide in place. The side of the HP-10 body will ride against this reference and your cuts will be as straight as your reference edge.


There are two ways to control depth of cut, one can use the HP-10 Depth Skids (that came with your HP-10 Dado Kit "Works) or by fastening shims to the sole (using double stick tape).


Write Your Own Review

You're reviewing: HP-10 90 Degree V-Groove Profile

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars
Overall



Recommended Products

  1. HP-10 90 Degree V-Groove Spare Iron
    HP-10 90 Degree V-Groove Spare Iron
    $55.00
    In production, call for availability
  2. HP-10 Guide Fence
    HP-10 Guide Fence
    $149.00
  3. HP-10 V-Groove Kit "Works"
    HP-10 V-Groove Kit "Works"
    $798.00