Accessories
Founder's CircleOur optional rosewood guide rails fit the HP-6 and HP-6v2 perfectly or you can make your own.When attached to the brass fence(s) you can precisely guide the plane for accurate cuts. These guides feature threaded brass inserts for years of use and... read more
The depth fences are designed to be used alone or can rub against a straight guide.We recommend using the HP-6 fence system when your cuts are less than 2" from the edge of your stock. If you have a need for a V-groove that exceeds the capacity of... read more
The HP-6v2 Fence system attached to the HP-6v2 body and the original HP-6 body via posts that screw into the side of the bodies. Just slide the fence onto the posts and tighten down with the knurled knobs. There are no tools needed to attach and... read more
Because rabbet cuts typically have a defined depth and width, they are cut in conjunction with a fence and a depth stop. The HP-6 Dual Fence System can be attached on either (or both) sides of the HP-6 body. read more
Because rabbet cuts typically have a defined depth and width, they are cut in conjunction with a fence and a depth stop. The HP-6 Depth Fence can be attached on either (or both) sides of the HP-6 body. read more