Archived Tools
Founder's Circle$80.10
This extraordinary tool looks and works different than any protractor you have ever seen. It's ease of use and vernier capabilities will allow you to accomplish any angular task! The MP-8 protractor is divided into whole degrees. The vernier allows... read more
Founder's Circle$0.00
All graduations on the RS-18 are permanently etched and are significantly easier to read than any rule we have seen or produced. They will not come off and are impervious to solvents. Here are the rules included on the RS-18:32nds reading left to... read more
Founder's Circle$0.00
Our recommendation is to scribe using the steel points. They leave a very sharp, crisp line. Should you need to use a pencil, it's very easy to convert one point. Loosen the collet nut on the scribing trammel head, pull out the steel scribe and... read more
Founder's Circle$0.00
Use the PG-5 for all molding patterns, model work, and furniture making. It is the perfect tool for linoleum and carpet cutouts, counter top cutouts, electrical and plumbing mating profiles and much more. One of our customers' favorite... read more
Founder's Circle$0.00
All mating joint surfaces of the PG-13 are indexed to each other. Loosen the locking knob(s) and align the two (or three) sections to approximately the tangent lines of your profile, and lock in place. (Note: The joints align at 180 degrees and... read more
Founder's Circle$0.00
A pantograph is a parallelogram device used for copying, enlarging or shrinking 2D images. There are 3D pantographs used for creating multiple copies of sculptures and other forms to avoid the tedium of producing work in quantity. Today’s copier... read more
Founder's Circle$0.00
Clamping easily to any 6" caliper (no drilling involved), the ANGLE MASTER PRO 6i accurately can be set or measure minute changes in angularity. The measurement of the caliper is then cross-referenced to an angle look-up table in the User's... read more
Founder's Circle$80.10
Each single flute bit is carefully machined to exacting standards. The unique tang allows for use in three-jawed powered drills (500-700 rpm maximum) with zero slippage in the chuck. Made in Japan, these extraordinary bits will provide several... read more
Founder's Circle$0.00
The 1995 Commemorative Tool #3 is the CT-3 Inclinometer. This is a handsome tool, with a compelling look and feel, and is surrounded by an extraordinary aura of accuracy. We know of no similar unique devices or instruments that compare in function... read more
Founder's Circle$0.00
Angle dividers are invaluable in determining the angles for perfect, gap free miter joints. For this purpose, our angle divider accurately determines miters for unknown angles. Flawlessly inset into the faces of the 6" solid brass handles are... read more